News

Recently, the price of steel has risen again and again, and the price of raw material iron ore has risen from an average price of US$108 per ton in 2020 to a historical high of US$210 per ton. Both China and the United States seem to be in a shortage of steel. "Dilemma", the base metal that has always been "high-quality and low-cost" seems to be covered with the attributes of precious metals. So what is the logic behind the continuous rise in global steel and iron ore prices? What is the deep reason? How will high steel prices adversely affect us? How to curb high steel prices? 1. What are the reasons behind the large-scale price increase of domestic steel mills? Recently, a number of domestic steel mills have also continued to raise prices. More than 90 steel mills have voluntarily increased their scrap steel purchase prices in order to secure the supply of raw materials. The ex-factory steel prices have also continuously climbed to 5,350 yuan per ton. The continuous increase in domestic steel prices is caused by various international and domestic factors. At the international level, the price of raw material iron ore has risen steadily, directly leading to a significant increase in the cost of steel mills; at the domestic level, due to environmental protection reasons, some steel mills have been restricted in production and reduced production, and steel production capacity cannot meet the increasing demand for steel. Due to the strong boost of the domestic economy, the recovery trend is obvious, the development situation of domestic new infrastructure is good, and the demand for steel is steadily increasing. In fact, the rise in steel consumption demand, the inflated iron ore price, and the insufficient capacity of domestic steel mills are only part of the reasons for the high steel prices. Another part of the underlying factor is that many steel companies and intermediaries see steel prices return in the short term. Will maintain an upward trend, so a large amount of steel is hoarded for profit. This is also the deep-seated reason why the actual steel inventory is high, but the market supply is low. Relying on the tight domestic steel market this year, most of the steel companies that have been losing money due to overcapacity in the past have achieved profits this year. More than 30 domestic steel companies made good profits in the first quarter, of which Baosteel`s net profit in the first quarter exceeded 50%. 100 million yuan, which was very rare in the past. On the whole, China's economy has recovered vigorously in the post-epidemic era, superimposed on high iron ore prices and insufficient capacity of domestic suppliers. Various factors have led to the crazy market of domestic steel prices. 2. The United States also lacks steel? The world falls into a steel shortage pattern? According to the analysis of the American Iron and Steel Industry Association, recently American steel products have also fallen into supply shortages and prices have soared. According to US media reports, the current price of hot-rolled steel coil in the United States has reached a high of US$1,500 per ton, which has touched the historical high of hot-rolled steel coil in the United States, which is equivalent to three times the average price level in the past 20 years. In 2020, due to the impact of the epidemic on production and consumption and the economic downturn, hot-rolled steel hit a historical low of US$460 per ton, which was only less than a year away. Hot-rolled steel has risen by more than $1,000, and steel prices have experienced a roller coaster-like trend. So why is the US steel market so tight and panic? What is the reason? On the one hand, the Biden government has continuously introduced large-scale fiscal stimulus policies, including the first wave of 1.9 trillion "helicopter money" subsidies and the second wave of 3 trillion infrastructure stimulus plans. Inflation on a global scale is the first factor that causes the price of steel to rise rapidly. On the other hand, Biden`s infrastructure stimulus plan covers a number of infrastructure reconstruction and renovation plans such as bridges, highways, stations, airports, ports, etc., which will lead to a surge in demand for steel in the United States, which also directly leads to the futures market. The rapid rise in prices. U.S. industry analysts said that the [panic" in the U.S. and global steel markets is spreading, and it is also boosting the tension in the U.S. steel market. 3. How do high iron ore prices adversely affect us? How to curb high steel prices? The continuous rise in global iron ore prices is the direct cause of the rise in domestic steel prices, and the iron ore pricing monopoly system is the fundamental reason for supporting high iron ore prices. The average value of the Platts ore price index in 2020 is US$108 per ton, and in May 2021, the Platts ore price index has exceeded the historical high value of US$210 per ton. The world`s main iron ore supply is mainly concentrated in the hands of the four major miners of Vale, Rio Tinto, BHP Billiton and FMG. my country`s iron ore is highly dependent on imports. Brazil and Australia alone account for more than 80% of my country`s iron ore supply. . Due to the excessive concentration of resources, the world's four major miners have absolute say in iron ore pricing. Although the current global epidemic has been effectively controlled and the economic situation has recovered to a certain extent, the recovery trend and global infrastructure demand, including China and the United States, are far from supporting US$210 per ton of iron ore. There is no doubt that the price of stone has seriously deviated from the current fundamentals. The current high price of iron ore is the result of a monopolistic pricing system and capital market speculation. How will the high iron ore price adversely affect us? One is that high ore prices will be transmitted to all aspects of the steel industry chain. The high iron ore will severely compress the profit margins of downstream steelmaking companies. Steel companies have to increase steel prices in order to make profits. However, the increase in steel prices will inevitably be transmitted to the downstream of the industrial chain and ultimately to consumers. The prices of all terminal products that use steel will be affected. For example, the cost of rails and trains will rise; the prices of construction and building materials will rise; the cost of automobiles will rise; stainless steel knives and vacuum flasks will be affected by fluctuations in steel prices. According to industry data, many iron and steel companies, including Baosteel, Baotou Steel, Shandong Iron and Steel, Nanjing Iron and Steel Co., Ltd., and Hangzhou Iron and Steel Co., Ltd., have spent 30% more on iron ore raw materials than in 2019. Second, steel is an important basic material, and its price rise will inevitably lead to a certain degree of inflation. This inflation will conduct horizontal transmission and indirectly raise prices, including food, eggs, milk, oil and other important materials related to people's livelihood. Third, high ore and steel prices are not conducive to the high-efficiency and environmental protection reforms of domestic steel companies. High steel prices will make those low-efficiency and high-energy-consuming steel production lines still profitable, which is not conducive to the investment of closed steel companies. Energy to update technology and equipment, and develop towards low energy consumption and high efficiency. Fourth, the price of iron ore will also seriously impact the manufacturing industry. Due to the rise in steel prices, the production enthusiasm of many downstream manufacturing companies that use steel as raw materials has declined. Under the current high steel prices, it will inevitably lead to an increase in terminal prices, such as , Building materials companies, car companies, etc., do not rule out that these downstream companies will temporarily restrict production and wait and see that steel prices return to a reasonable range before proceeding to normal production. 4. How long will the high price of iron ore last? How to deal with the negative impact of steel prices on us? In the short term, due to high profits, the four major miners in Australia and Brazil will not increase production significantly. As the international epidemic situation and the pace of economic recovery are further improved, the global consumption of steel will continue to grow slowly. In 2021 Iron ore will still maintain a high price range throughout the year. In the medium and long term, after the release of infrastructure manuscripts and the decline in the effectiveness of stimulus policies, steel consumption will fall into a downward trend, and iron ore will be greatly impacted by then and gradually return to the rational range. The four major miners will also bid farewell to the profiteering model. Regarding the current high prices, one is that we should fully look for alternative sources other than the four major miners, or gradually shift Australia`s share of iron ore to Brazil, and stir up the price of ore between Australia and Brazil through China`s huge buyer power. Competition disrupts the current monopolistic pricing system of the four major miners. Second, we should fully crack down on steel hoarding under the current high steel prices, release steel stocks in the domestic market as much as possible, and alleviate the shortage of steel.

Barbed Expanded Metal Mesh is a new product developed by our company last year according to customer requirements. The production process is embedded the barbs in the expanded metal mesh. It is very convenient and versatile. It can be used as a safety protection product. Expanded Mesh is made of sheet, long and wide size can be determined with the requirements of the customer. The barb is very sharp. This kind of product is very similar to the razor barbed wire, but the razor barbed wire is in the form of a coil or a ring, and our barbed metal mesh is in piece. Other products we can supply is: steel mesh, crimped wire mesh, perforated metal, aluminum foil mesh, barbecue wire mesh and other metal mesh products.

How To Choose Window Screening? As a professional manufacturer, we can share it with you. There is Galvanized Wire Mesh, Aluminum Wire Mesh, King Kong Screen Mesh, Stainless steel window screen netting,Plastic Window Screen, Fiberglass Window Screening. All these products are popular be used as Window Screening. Then how to choose window screening? What are the advantages and disadvantages of each material? Here is details of these products for you to chose the suitable type: 1. Galvanized Window Screen Netting Material: Low carton steel wire/galvanized iron wire Surface treatment: Hot-dip galvanized/electric galvanized or enameled. Color could be silver, blue, green, etc. Features: Durable, Light weight, good toughness, corrosion resistance, ventilation, easy to clean, etc. It is economy and very popular in Middle East and worldwide. 2. Aluminum Window Screening Material: aluminum alloy wire. Surface treatment: enameled or natural. Color: black, grey, brown, green, etc. Features: good corrosion resistance and rust resistance, Strong and durable screening that resists rust and will not sag. Enameled Aluminum Wire Mesh is mainly sold to the United States, Europe and other regions. 3. Stainless Steel Window Screen Netting Stainless steel insect mesh is made of the basic stainless alloy (Type 304). It is the most durable of the materials available for insect mesh and has excellent resistance to corrosion.Stainless steel insect mesh keeps out flies, wasps, bees, mosquitoes and other insects Material: SS302 SS304, SS304L, SS316, etc. Features: A: Anti rodent, high strength and toughness, can avoid a series of health problems caused by mice entering the house. B: Mosquitoes and flies, in the basic use of anti ordinary mosquitoes and insects but also can prevent a moist place small wheat midge. C: Fire protection, high temperature resistance, flame retardant, the buildings have fire protection facilities, but the general nylon screen can not fire, stainless steel window screen can meet the basic fire protection needs. D: Breathable and transparent, the product surface color bright and beautiful, compared with ordinary nylon screen screen can better increase the air flow rate and the light of the sun irradiation. 4. King Kong Screen Mesh Material: SS304, SS304L, SS316, etc. Surface treatment: Powder coated Color: Black, Grey, White,etc. Features: No rust, anti-theft, anti-cut, no maintain, etc. King Kong Screen Mesh is the highest grade window screening and it is expensive than others kinds, however it deserved. It is mainly sold to the United States, Europe, Japan, etc. 5. Plastic Insect Screen Material: PE/HDPE. Color: white, grey, green, blue, etc. Features: Easy to clean and wash, Long service life, Durable UV resistance, Water and air permeable. It is the traditional and most cheap type. 6. Fiberglass window screening Material: Fiberglass yarn. Color: black, grey, white, blue, green, etc. Features: Invisible, anti-aging, cold resistance, heat resistance, fire retardant, Anti-static, No deformation, UV resistance, High tensile strength, Non-toxic and tasteless. It is high grade Window Screening product. And it is very popular in Europe and worldwide. At the moment, aluminum window screen netting and King Kong Window mesh is most popular around the world. So they are major products continuously produced.

Wire Mesh , also called wire wire cloth, screen, is a large category of wire fabric. The Wire Mesh, or we say metal wire mesh. is made of low carbon steel wire, galvanized, stainless steel wire, brass wire, or aluminum wire. The surface is with bright color. It is available in different sizes and shapes of opening. wire Mesh is made of metal wire through certain methods using different machines. It can be weaving mesh, or welded mesh, or punching mesh. And it also contains wire mesh processing products, such as filter disc, filter tube, or baskets. About the surface, it contains so many different ways: natural color, galvanized, PVC coated, Vinyl coated,bright color, or colorful. It is widely used in agricultural, transportation, industrial, horticultural, filtration and food. It is also used in mines, gardening, machine protection and other fields as decorations. Wire Mesh can be used as metal fencing or decorative woven mesh in building decoration. It can be the window screens, curtains, ceilings or walls. Our Wire Mesh have many types, include Welded Wire Mesh, Aluminium Wire Netting, Stainless Steel Wire Mesh, Crimped Wire Mesh, Storage Basket, Plate Mesh, expanded metal mesh, perforated metal mesh, decoration wire mesh, filter products, barbecue wire mesh and other alloy net.

Perforated metal mesh or say punching mesh is widely used in daily life. Now it is summarized as follows: (1) used as filters in internal combustion engine of automobile; (2) used as comminuted screen, griddle and H screen for mine, pharmaceutical or food industries; (3) used as sound insulation of indoor building, also used in grain depot and mechanical protection & decoration industries; (4) used as grille, the food cover, fruit baskets and compotes; (5) used as goods shelves, exhibition stand and water strainer of football field, etc; If you are interested in perforated metal sheet suppliers,please contact us.

As a professional wire mesh fence manufacturer and exporter, Anping Xinzheng have a professional production line of wire mesh fence including spot welding machine, single spot welding machine, auto steel wire mesh welding and shaping machine, bending machine for big wire mesh panels and matching PVC coated partner. Together with the fence products , we can supply the welded mesh fence gate according to the customers request .Meanwhile we supply all the fence accessories for customer such as barbed wire ,concertina razor wire ,barbed arms,fence posts. Special fence and fence accessories is also available according to customers requests. We can supply the home products for the customers such as dog kennel ,sheep fence and chicken wire. What influence the price of the wire mesh fence is the surface treatment ways. Our wire mesh fence has following surface treatment ways: 1.Hot dipped galvanized after welding then PVC coated 2.Hot dipped galvanized after welding then PVC painted 3.Hot dipped galvanized after welding . 4.Electric galvanized after welding ,then PVC coated 5.Electric galvanized after welding ,then PVC painted The main wire mesh fence products contain: welded fence, curvy welded fence, Euro fence, double loops wire mesh fence, chain link fence, ornamental fence, barbed wire or razor barbed wire fence, protecting fence, garden fence, fencing posts,clips or accessories, grassland fence,temporary fence, etc. Our fence products are corrosion-resistance,anti-aging property,acid and alkali resistance,no color fading,smooth and neat surface with comfortable touch. To get further information about our products or services, you can contact us via telephone, email or by visiting us in person.we are a professional Wire Mesh Fence Manufacturers.

We, Anping Xinzheng Metal Wire Mesh Co., Ltd is a professional manufacturer and exporter of metal wire mesh products. we are located in Industrial Park of Anping, which is well known as Wire Mesh Land of China, and which enjoys convenient transport condition being close to Beijing, Capital City of China, and near to Tianjin, one of the most important seaport in North China. We follow the policy of Reliable Service, Good Quality and Customer Satisfaction in business. We would like to cooperate with friends home and abroad and to provide quality products and services for world customers. For more information about our company or services, please feel free to contact us. May our cooperation bring you happiness and benefit.Factory insist on quality first, reputation supreme business purposes and the new and old customers in close cooperation, joint development.

Stainless steel wire mesh is not absolute rustless, so the correct storage of stainless steel mesh and other stainless steel products is a big problem. The corrosion resistance of stainless steel is mainly subject to its chemical elements nickel, chromium, copper, molybdenum, titanium, and others. Optional stainless steel wire mesh material to be choose, because the structure and properties of stainless steel wire mesh it uses a very high demand, in addition to these stainless steel mesh storage environment is also very important, I explain below the wire mesh storage requirements for stainless steel products distributor or user. Stainless steel wire mesh stores required to maintain ventilation, dry and should be clean, and avoid the direct sunlight; Pay attention to the inclement weather, and take appropriate precautions to avoid stainless steel wire mesh products have been affected by the rain and snow ; Stainless steel wire mesh should be packed, to avoid contact with acids, alkalis, oils, organic solvents and other substances; Stainless steel wire mesh products to be classified put away, put in a roll way, each going over a quarter turning once; Temperature and Humidity control is very important.Temperature is best at room temperature below 25 degrees, and not too wet. Find any relevant problems, to quickly resolve. I believe the above points, the customer's stainless steel wire mesh life will be considerably extended. Hope the information can help you in this field.

The three-day 2018 18th China Anping International Wire Mesh Expo officially opened today, and the Anping County Wire Mesh International Exhibition Center is splendid. There are three exhibition areas and more than 200 row booths in this year's Wire Mesh Expo. The products displayed include hundreds kinds of wire mesh products and different kinds of mechanical equipment. Merchants from different countries and regions of the world came to Anping with demand planning and purchasing intentions. They visited the exhibition and brought cooperation opportunities to Anping's wire mesh enterprises, which brought a win-win business opportunity between Anping and merchants all over the world. Anping company will meet the opportunity of the wire mesh expo, and promote the cooperation with the merchants who come to our company to visit and negotiate with us as soon as possible, let more people understand Anping, understand the Anping wire mesh, understand the ability to produce all kinds of wire mesh products (stainless steel wire mesh, perforated metal mesh, expanded metal, welded wire mesh, crimped wire mesh, aluminum foil mesh, etc) Anping Xinzheng Metal Wire Mesh Co., Ltd.

Rusty reason Stainless steel mesh products in different materials and environments will rust. Such as material 201 stainless steel wire mesh products is no nickel stainless steel net, stainless steel wire in the chemical composition does not contain its a bit of nickel is 0 nickel, nickel is a kind of rare metal, it is not easy to rust in stainless steel wire, but in general conditions such as coastal cities, acid and alkali conditions using time in 6 months to 12 months will appear rust. Will 304 stainless steel mesh rust? Should say will not rust, if use environment is in the high temperature, acid and alkali, coastal salt environment, in addition to the eight nickel content, but also a certain amount of carbon content, the higher content of carbon will make stainless steel wire mesh easy to rust, low content will not rust. Usually material 304 carbon content in equal to or less than 0.06 will not rust, greater than 0.06 or 0.06, 0.08 will be easy to rust, salt fog test in our test 304 a low carbon content in the trial will not rust, soak in salt water 24 hours will not rust material of 304 l stainless steel wire mesh products will not rust, so the content of carbon is also one of the reasons affecting rust in stainless steel wire mesh products. In 304 material in more than 316, 316L, 321 material won't appear rusty phenomenon, because of the high content of nickel, good carbon content is low generally content in equal to less than 0.03, excellent product quality of stainless steel wire mesh.

Recently, a round of serious environmental protection supervision is spreading at Dainan,Jiangsu where the famous town of stainless steel in China. This situation caused rising cost of enterprise production and pickling, and Qingshan part of equipment failure, electricity tension causes such as the shortage of resource supply more of the bar. It is reported that the price of Qingshan stainless steel bar rose $190/ton on 23rd. The price of stainless steel wire has increased by $158/ton. Due to the limited supply of overall resources, much of steel factory will also raise the factory price of stainless steel rod wire successively on 24th.

Beginning on June 1, 2018, the General Administration of Customs will begin the formal implementation of Decree No. 56. This notice, known as the 2017 Decree No. 56, is called [Announcement on Adjusting Matters Concerning the Entry and Exit of Water and Air Transport Vehicles and Manifest Supervision". This announcement is intended to ensure the smooth progress of the nationwide customs clearance and integration reforms, and effectively strengthen the customs' management of the inbound and outbound transport means of water and air transport and the goods and articles they carry, standardize the data declaration and transmission, ensure the completeness and accuracy of the data, and effectively implement safe access. And the risk prevention and control mechanism is closely related to the export industry. We are not paying attention to the risk that the goods will be detained! New rules and requirements: 1. China Customs opens the time limit switch of the manifest management system, that is, complete and accurate manifest data must be sent to China Customs via electronic data 24 hours prior to shipment (ships leaving mainland China or entering or transiting mainland China). ; 2. The names of all the goods under the bill of lading shall be clearly and completely declared on the manifest; 3. The data items requested by the manifest include the information of the receiver and the consignor, such as the code of the receiver and consignor and the contact number of the receiver and consignor. For shipments expected to be exported from Mainland China on and after June 1, 2018, the shipping company will comply with the Chinese Customs' proposal of a new pre-shipment manifest for cargo manifests. Before the shipper declares goods to the customs of the exporting country, the shipper shall record the pre-shipment manifests in accordance with the requirements of the shipping agents designated by the shipping company. To this end, Maersk, Hapag-Lloyd, MSC, MCC and many other shipping companies have issued emergency notices: What does this adjustment mean? What changes will bring? Let's take a look at the official answer of the shipping company Safmarine: Question one: What does it mean by June 1, 2018? Answer one: For goods imported into mainland China or transited through Mainland China ports, if the expected departure date of the loading vessel is June 1st, 2018, 2018, the complete and accurate manifest data of the cargo must be on board. The electronic data was sent to China Customs 24 hours ago. Question 2: What does the complete and accurate manifest data mean? Answer 2: The names of all the goods under the bill of lading should be clearly and completely declared in the manifest, and the data items for the new manifest adjustment include: Shipper Code (Required) Shipper's phone number (required) Shipper's AEO Enterprise Code (optional) Consignee Name (Required, please fill in the name of the actual consignee; if the consignee is to order the consignee to TO ORDER, this must be "TO ORDER") Consignee code (filled only when there is an actual consignee; when the consignee is TO ORDER, no information is required here.) Consignee's phone number (filled only when there is an actual consignee; when the consignee is TO ORDER, no information is required here.) The name of the specific contact person of the consignee (filled only when there is an actual consignee; when the consignee is TO ORDER, no information is required here). Consignee's contact person's phone number (filled only when there is an actual consignee; when the consignee is TO ORDER, no information is required here.) Consignee`s AEO Enterprise Code (optional, with actual consignee) Notify party's code (When the recipient is TO ORDER, this item is required) Notification party's phone number (When the recipient is TO ORDER, this item is required) Question 3: Is there any penalty for irregularities in manifest declarations? Answer 3: The Customs has already formulated the penalty regulations for irregularities in manifest declarations. Regulations: "Implementation Regulations of the Customs of the People's Republic of China on Administrative Punishments," which was issued in 2004 and became effective. Question 4: Will the process of adjusting manifest declarations lead to the disclosure of customers' commercial sensitive information? Answer four: The process of new manifest adjustment will not lead to the disclosure of the customer's business sensitive information. The bill of lading issued by the carrier does not show these sensitive data items added to the manifest (except for the name of the consignee); after the manifest is sent to the customs, the customs staff must protect the trade secrets and customs work secrets in accordance with the law. Question 5: Will the manifest be modified after the deadline? Answer 5: The current process is pending for the application for modification of the manifest sent after the deadline. We will inform the customer in the next customer notification. The Question 6: Does the customer have to comply with the deadline for shipping instructions for goods imported to and from mainland China? Answer 6: Yes. Question 7: Will the customers be reminded to submit the "shipping instructions" on time for goods imported into mainland China or transit through mainland China? Answer 7: Yes. For goods imported into mainland China or transited through Mainland China ports, if the customer fails to send the [shipping instructions" on time, we will remind customers to submit the [ships" by e-mail in the first 5 days, 4 days and 3 days respectively. Instructions." Question 8: What if there is missing one or more required information in the "shipping instructions" submitted by the customer? Solution 8: If the required information is missing, the "Shipping Instructions" will not be accepted. At the same time, the customer will receive an e-mail notification requesting the submission of a complete "shipping instructions." Question 9: Will the revised data items be stipulated for manifests, and how can customers submit data information to Safmarine? Answer 9: You can submit these new information when you submit the Shipping Instructions through your familiar electronic channel. The "My.Safmarine.com" website is making corresponding adjustments to meet the requirements of the new manifest requirements. After adjustments, clients can submit information directly on the website; customers using INTTRA and EDI should fill in the added data items in the COMMENT box. send. Question 10: Does the shipping company check the customer's "shipping instructions" submitted by the customer, the sender code? Answer 10: The shipping company does not proofread the sender and sender codes. The consignor or booking agent is responsible for submitting accurate receipt and consignor codes in the Shipping Instructions. China Customs has released the "Enterprise Code Type Summary Sheet" for the company's reference and can complete the enterprise code declaration according to the index of the countries or regions in the table. Question 11: If the receiver and the consignor are natural persons instead of companies, can they accept no enterprise code? Answer XI: Under normal circumstances, our bill of lading does not accept the receiving and shipping parties as natural persons. Under the premise that the bill of lading allows, if the receiver and consignor are natural persons, the customer should fill in the customer's Chinese ID number or passport number at the company code. Question 12: If the countries or regions of the consignor or sender are not in the "Enterprise Code Type Summary Table," how can the customer provide the enterprise code? Answer 12: If the country or region to which the consignor or the consignor belongs is not listed in the "List of Enterprise Code Types" or cannot provide the type of enterprise code listed in the table, the statutory enterprise registration code of the country or region where it is located should be filled in. Anping Xinzheng Metal Wire Mesh Co., Ltd. can supply good quality metal wire mesh products, contain Stainless Steel Wire Mesh, Welded Wire Mesh, Crimped Wire Mesh, Expanded Metal Mesh, Aluminum Foil Mesh, Window Screen Netting, Perforated Metal Mesh, Galvanized Square Wire Mesh, Brass Wire Cloth, Wire Processed Products and other wire products.

On March 8, 2018, US President Trump signed an announcement confirming that imported steel and aluminum products threatened US national security and decided to impose tariffs (ie 232 measures) on imported steel and aluminum products from March 23. The 232 measures violated the relevant rules of the World Trade Organization and did not comply with the [security exceptions" provision, which actually constituted safeguard measures. This measure was implemented on March 23 and caused serious damage to our country`s interests. In order to safeguard China`s interests and balance the losses caused by the U.S. 232 measures to China`s interests, I`ve suspended tariff concessions on seven categories of 128 imported goods originating in the United States since April 2, 2018, based on the current applicable tariff rates. Tariffs have been imposed on the importation of tariffs on 120 items of imported goods such as fruits and products, and a tariff rate of 25% on 8 items such as pork and products. The current policy of tax-free and tax-exemption remains unchanged. China's advocacy and support for the multilateral trading system and the suspension of tariff concessions to the United States are legitimate measures taken by China to use the rules of the World Trade Organization and safeguard its interests. Anping Xinzheng Metal Wire Mesh Co., Ltd can produce stainless steel wire mesh, expanded metal mesh, perforated metal mesh, aluminum foil mesh, filter disc, barbecue wire mesh, brass wire mesh, and other metal mesh products.

Chrominum(Cr) Cr is the main element to decide the resistance of corrosion in stainless steel. Metal corrosion divide into chemical corrosion and non-chemical corrosion. Under high temperature, metal produce rust through oxygen, it named chemical corrosion. Otherwise, under normal temperature, this phenonmenon named non-chemical corrosion. The higher content of chromium, the better the corrosion resistance of steel is, the chromium content reaches 25% and 37.5%, it makes the steel have higher corrosion resistance. Eleven percent is the minimum limit for chromium, which is less than 11% chromium, and is generally not named stainless steel. Nickel (Ni) It is a good corrosion resistant material, which is the main element of austenite in steel. After adding nickel to stainless steel, the organization changed significantly. As the content of nickel increases in stainless steel, the austenitic body will increase, and the corrosion resistance, high temperature resistance and processing resistance of stainless steel will be enhanced, thus improving the cold processing performance of steel. Therefore, the stainless steel with higher nickel is suitable for drawing filaments and microfilaments. Carbon (C) In stainless steel, carbon content and its distribution form, to a great extent, influences the performance of stainless steel and organization: on the one hand, carbon austenitic elements are stable, and effect of the degree is very big, about 30 times that of the nickel, high carbon content of martensite stainless steel, perfectly acceptable to quenching strengthening, which can greatly improve its performance in the mechanical strength; On the other hand, due to the high affinity of carbon and chromium, the chromium of 17 times of carbon in stainless steel is combined with chromium carbide. With the increase of carbon content in steel, the more chromium is formed with carbon, thus significantly reducing the corrosion resistance of steel. The increase of carbon content will reduce the corrosion resistance of stainless steel, but can improve the hardness of stainless steel. Molybdenum (Mo) It can improve the corrosion resistance of stainless steel. Adding molybdenum in stainless steel can further blunt the surface of the stainless steel and further improve the corrosion resistance of the stainless steel. Molybdenum can not form precipitated molybdenum in stainless steel, which improves the tensile strength of stainless steel. Molybdenum can also significantly improve the corrosion resistance of chloride ions (such as) and organic acids. However, stainless steel with molybdenum is not suitable for use in nitric acid. The corrosion rate of stainless steel with molybdenum is twice as fast as that without molybdenum. Copper (Cu) Copper can improve the corrosion resistance of stainless steel and acetic acid. Copper is added to chromium manganese nitrogen stainless steel, which will accelerate the corrosion of stainless steel. Molybdenum has an adverse effect on the single austenitic structure of steel, so in the molybdenum steel, in order to make the steel have a single austenitic structure after heat treatment. The content of nickel in manganese and other elements should be increased correspondingly. Titanium (Ti) It is a strong carbide forming element which can improve the corrosion resistance of steel. However, titanium carbide has an adverse effect on the surface quality of stainless steel, so it is generally improved by adding niobium to the stainless steel with higher surface requirements. Silicon (Si) Silicon has a significant effect on the antioxidant capacity of chromium steel, with 5% chromium and 1% silicon steel, and the antioxidant capacity is equal to 12% chromium steel. Such as make steel at 1000 ℃ can resist oxidation, need 22% of chromium containing 0.5% silicon, such as join after 2.5 ~ 3% of silicon, only need 12% of chromium. It is also recommended to add 2.5% silicon to Cr15Ni20 chromium nickel steel, and the antioxidant properties can be equivalent to Cr15Ni60 chromium nickel alloy. Manganese (Mn) and Nitrogen (N) Manganese and nitrogen have the same effect as nickel in stainless steel. The stable austenite of manganese is one half of nickel, and nitrogen is much larger than nickel, about 40 times as much as nickel. Thus, manganese and nitrogen can obtain a single austenite structure. However, the addition of manganese will reduce the corrosion resistance of stainless steel with low chromium. Meanwhile, high manganese austenitic steel is not easy to be processed. As a result, manganese is not used in stainless steel alone and only partially substituted for nickel. Phosphorus (P) and Sulfur (S) It is a harmful element in stainless steel, which has adverse effects on corrosion resistance and ramming of stainless steel.

Yesterday, 2013-03-22, a line of four Korea friend who worked in a high-end windows and doors manufacuture company in South Korea came to Anping Xinzheng Hardware Network Co., Ltd for a visit and business negotiations. the entire negotiations in a harmonious and friendly atmosphere, and reached a purchase intention. Later, Mr. Yan Xiangchong, the general manager of Anping Xinzheng company, led them to visit the workshop. A group of people visited in turn Weave mesh products workshops, perforated metal mesh workshop, expanded metal mesh workshop, welded wire mesh workshop, wire drawing workshop and PVC coated workshop:

According to the official IRNA news agency of Iran, since February 28th, the purchase order in Iran's import trade is not allowed to be based on the dollar. The move is responsive to the formal request made by the Central Bank of Iran to deal with the volatility of the dollar. Figure | foreign media reported this event Mehdi Kasraeipour, director of Iran provincial central bank's foreign exchange regulation and policy affairs, said it would not cause much trouble to traders, because the share of the US dollar in Iran trade is not so high. Due to the US sanctions, Iran's banking industry has been unable to use the US dollar for a long time. That's what he said: "Considering that the use of the dollar is banned for Iran", "Hou," and "t". Taking into account the fact that Iran and traders are banned from the US dollar, they are actually using alternative currencies in transactions, and there is no reason to deal with invoices based on the dollar as a basic exchange rate. (stainless steel wire mesh) He also stressed that Iran businessmen need to inform suppliers to change the basic currency of order from the US dollar to other currencies, so as to ensure that the relevant import documents operate normally when they enter Iran. Therefore, there is a need to contact Iran guests to confirm whether the order needs to be modified! This passage can be sent to the guests in Iran to ask if they know and need to be adjusted. (expanded metal mesh) "According to the official, Iranian merchants would need to inform their inform", it is the following two aspects. What if a contract has been signed on the basis of the dollar before? (aluminum foil mesh) Please contact the guest as soon as possible and propose to pay the equivalent RMB or euro. Now some Iran guests have already made the initiative to pay the tail money with the euro. Forbes.com, the financial media in the United States, said a little "sour words". "The dollar is still the most important currency in international transactions, and many commodities are still priced in dollars, so the new rules are bound to have a certain impact." "In view of the strong ties between Iran and some European countries, they may turn to the euro, but additional currency exchange may increase Iran's import cost and further increase inflation." Iran's "go to the dollar" This is not the first time in Iran to "go to the dollar". (wire mesh disc) In January 2015, Iran's semi official media Tasnim reported that Iran's central bank announced on the 25 th of the month that it will cease to settle in US dollar when trading with foreign countries. When signing foreign trade contracts, it will use RMB, euro, Turkey lira, Russia rouble and won. In January 2016, the same Iran central bank stopped trading in US dollars with the U. S. dollar. At present, the oil producing countries such as Venezuela, Saudi Arabia and Russia have also made a lot of efforts on the road to dollarization. During the meeting between Tehran and Russian President Putin in November last year, Iran leader Ali Khamenei compared the United States to the enemy, and called for Moscow to completely cut off all dealings with the US dollar payment system. In January this year, Pakistan's central bank has approved a trader to use RMB as settlement currency in bilateral trade and China in Bazhong said both public and private enterprises can choose to use the renminbi in bilateral trade and investment activities, the central bank has formulated relevant regulations to promote the use of RMB in trade and investment.

In 2017 the steel market logic is banned over the expected demand of steel stacking. From the perspective of consumption, this year's three or four line real estate sales in support of real estate investment, the growth rate of cars is decreasing, but the whole is still growing, which will support the formation of plates. In this year's domestic commodities, the black department remains a single show, analysts say. In 2017, the black products continued to be strong in 2016, and the long wood was stronger than the board, and the finished products were stronger than the raw materials. Analysts said that in 2017, the price difference between varieties showed obvious, she pointed out that steel prices rose steadily, at the end of 11, the thread index reached 4600, the highest since 2012 highs, at the same time, the basic balance of supply and demand double focus, market prices reasonable return; iron ore structural contradictions eased slightly in early December, although stocks more than 1.4 tons however, high quality ore proportion is still low, and the varieties of prices to expand. She also pointed out that in 2017, the overall improvement of the steel industry performance is shown in the following aspects: the efficiency of the key steel enterprises is improving, and the overall sales profit rate is 3.88% in 1-8 months, the growth rate is significantly higher than that in 2016, and the long timber efficiency is better than the plate. But at the same time, she pointed out that the debt rate of enterprises still remained at about 70%. There was a big gap between the target of 60%, and the demand for leveraged steel enterprises was urgent. In particular, she pointed out that the steel market stock in 2017 was a record low. On ground of steel and environmental protection production actual production decline, while demand than expected, resulting in steel stocks continued to decline. By the end of November, five varieties of social inventory 8 million 360 thousand tons, representing a decrease of 840 thousand tons or 9.1% over the same period last year, both a record low. At the same time, analysts look forward to the steel industry in 2018. According to the model, according to the model, most of the major domestic macroeconomic indicators in 2018 continued to increase the temperature. She pointed out that the environmental pressure normalization, 2018 winter heating production policy will continue; considering the supply side reform makes steel profits can be maintained for a long time, rates remain high, the use of non limited production capacity is expected to stage her in 2018, 10.22 tons of blast furnace ironmaking capacity effectively, electric furnace steelmaking capacity of 1.3 tons. She further indicated that according to the model, sorting out 128 small industries in eight industries, and concluded that domestic crude steel consumption increased by 1.83% over the same period in 2017, and it is estimated that domestic crude steel consumption will drop 0.06% in 2018. Analysts said, taking into account the land area of growth accelerated, low-income housing rental rights plan and other factors, is expected in 2018 the domestic real estate investment, new housing construction area, construction area and other indicators about rate of growth, but the growth rate narrowed; if we consider the private housing construction, real estate is expected in 2018 steel consumption declined slightly high probability. The analyst also explained the logic of the operation of China's steel industry in 2018. Analysts show that macro policy will decide the transformation of supply and demand of steel, and at the same time, the supply of steel will shift from insufficient to relative prosperity, while demand will shift from growth to flat or decline. Moreover, the relative surplus of domestic supply will promote exports. She pointed out that in 2018 the steel production profits will enter the normal regression stage, because the original fuel prices is not up, steel profits will fall back in the form of steel prices to the performance, when the screw screw screw ore, coke, scrap ratio, volume difference will appear rational regression. She finally pointed out that the future of China's iron and steel industry will enter a stage of structural adjustment, which is mainly manifested in five aspects: first, the production process: electric furnace accounted for the rapid increase; second, regional structural change: the consumption subject to the central and western development; upgrade third, variety structure: stainless steel accounted for fourth, improve the industry concentration; promotion: TOP10 accounted for 60%; fifth, the industry average debt ratio fell below 60%.

China's steel export price has reached the highest level in nearly four years On the 18 day, from the China Iron and Steel Industry Association, it was learned that in October, 2017,China's steel exports amounted to 4 million 979 thousand tons, the lowest value since March 2014, and the average export price of steel was 798.84 dollars per ton, the highest value since February 2014. Now the price of iron and steel is at the peak, which has seriously affected the price of our products, mainly including stainless steel wire mesh, expanded metal mesh, perforated metalmesh, galvanized steel mesh and other steel products.

It is the Chinese Spring Festival for the next two months. As usual, for family reunion, the festival, all Chinese will begain a long holiday. Anping Xinzheng Metal Wire Mesh Co., Ltd also announced today the time schedule: Woven Mesh Products Workshop: holiday time 2018-02-05 to 2018-02-23 Metal Plate Mesh Products Workshop: holiday time 2018-02-08 to 2018-02-20 Office: holiday time 2018-02-10 to 2018-02-20 At present, the stocks of our company is less, the general goods are to be custom-made. Stainless steel plain weave mesh and Stainless steel Dutch weave mesh currently have some inventory, but less in quantity. Stainless steel twill weave mesh and stainless steel crimped mesh have no any inventory. Steel mesh, metal plate mesh products and filter products are also only a small stock which is not common size. According to usual practice, this time period is the peak period in the international trade business, but due to the workers' holiday and raw material supply is not good, the production cycle is generally longer. It is hoped that the friends who have the purchase plan can advance the purchase plan in order to avoid the contradiction of the long period of production period. In addition the festival will generally appear short of raw material prices, especially storage basket and filter disc the complex production process, need the manual operation of deep processing products. In the case of the above, we should inform you that the customers who are looking for a purchase plan will be able to move ahead of time.

Together with the world, fighting epidemic is everyone's responsibility In response to the call of the Chinese government's Epidemic Prevention and Control Office, Xinzheng Company organized all employees to carry out nucleic acid testing today, striving to achieve early detection, early reporting, early isolation, and early treatment, so as to improve the enterprise's prevention and control capabilities, and effectively prevent the epidemic from spreading in the enterprise. internal occurrence, spread, ensure the health and life safety of employees, and maintain the normal production and operation order of the enterprise.